BMW R1200R 05-10 F800ST Handlebar Riser 50mm (2")
On the BMW F800ST, installing a longer brakeline with this bar riser is required, Please see out other listing for a longer brake line or contact us with any questions. Sorry we have no longer brakeline options for the non-ABS F800ST.
This great bar riser set from Verholen moves the handlebar 50mm (about 2 inches) closer to you to give you the relief you are looking for.
Verholen has confirmed this riser fits BMW R1200R up to 2010 (Brake line normally OK, we have a longer Brake line option is needed), F800ST (Requires a longer brake line, not included). Please note brake line are a special order item and normally take 1 -3 weeks to get. Special order are not cancelable or returnable.
Verholen has tested this riser on BMW F800ST, R1200R and Suzuki Bandit 1200.
Please note that this list indicates only a small selection of motorcycles, however, Verholen states that this kit works on most motorcycles with 22mm tube style handlebars with a hole center distance of 32 - 34mm.
Thank you for understanding that with so many motorcycles out there, the manufacturer cannot test all makes and models.
While most bikes do not need to change out the brake or clutch line, some do. Generally the line just needs to be loosened from the cable ties, or repositioned behind the handlebar to provide the extra room needed. However, be advised that your make/model may require the addition of a longer brake or clutch line. After installing the riser but BEFORE riding, please verify that you can turn your handlebars from lock to lock and all the lines are not stretched or pinched.
We recommend that this part be installed by a trained, certified technician.